Setting The Date And Time; Changing The Display Language - Olympus SP-565UZ Bedienungsanleitung

Setting the date and time

The date and time set here are saved to image
fi le names, date prints and other data.
1
Remove the lens cap, and press
the o button to turn on the
camera.
●
The date and time setting screen is displayed
when the date and time are not set.
X
Y
----
CANCEL
Date and time setting screen
2
Use 78 to select the year for [Y].
X
Y
2008
CANCEL
3
Press : to save the setting for [Y].
X
Y
2008
CANCEL
M D TIME
-- -- -- -- Y M D
MENU
M D TIME
Y M D
-- -- -- --
MENU
M D TIME
Y M D
10 -- -- --
MENU
4
As in steps 2 and 3, use 789:
and the o button to set [M]
(month), [D] (day), [TIME] (hours
and minutes) and [Y/M/D] (date
order).
For precise time setting, press the o button
as the time signal strikes 00 seconds.
To change the date and time, make the
setting from the menu. [X (Date/time)]
(p. 59)
To check the date and time
Press the g button while the camera is
turned off. The current time and alarm time
are displayed for approx. 3 seconds.

Changing the display language

The language for the menu and error messages
displayed on the monitor/viewfi nder is selectable.
1
Set the mode dial to a position other
than R.
2
Press the m button, and press
789: to select [x SETUP].
RESET RESET
PANORAMA PANORAMA
EXIT
3
Press the o button.
SETUP
1 MEMORY FORMAT
2 BACKUP
3
4
PW ON SETUP
5
MENU COLOR
EXIT
IMAGE IMAGE
QUALITY QUALITY
CAMERA CAMERA
MENU MENU SETUP SETUP
SILENT SILENT
S C N S C N MODE MODE
SET
OK
MENU
ENGLISH
NORMAL
SET OK
MENU
EN 5