Comelit BRAVO Serie Bedienungsanleitung Seite 7

- off: audio activity from the external unit or from another intercom device is
heard on this monitor;
- on: audio activity from this monitor is heard on the external unit or on another
intercom device.
8 Brightness adjustment knob (turn clockwise to increase brightness).
9 Color intensity or contrast adjustment knob (turn clockwise to increase the
value).
10 Removable loudspeaker (lift the device to switch automatically to a private
conversation).
11 Masking templates (interchangeable and customizable through the use of an
optional Kit). (A)
12 3.5" screen in color or 4'' in black and white.
(A) For further information contact your usual installer.
Changing monitor ringtones
1 Keep the pushbutton
operation is only possible with the system in standby mode; otherwise the
indicator LED will flash to warn the user).
2 Press and release the pushbutton
1 time: (1 confirmation tone is emitted) to change the ringtone of a call from the
external unit.
2 times: (2 confirmation tones emitted) to change the switchboard call ringtone.
3 times: (3 confirmation tones emitted) to change the door bell ringtone.
Any further presses of the pushbutton
above.
After the last time the pushbutton
before proceeding to the next stage.
3 Press and release the pushbutton
available in sequence. If you want to hear the same ringtone several times,
press and hold the pushbutton
4 Press the key
any time) the change monitor ringtone mode. On exiting from the Monitor a
confirmation tone will be emitted.
pressed until a confirmation tone sounds (this
to confirm selection of the last ringtone heard and to exit (at
FT BRAVO 02
:
repeats the sequence described
is pressed, wait for a confirmation tone
to scroll through the various ringtones
.
5 FT BRAVO 02