First Installation - Philips HD8827 Bedienungsanleitung

English
10

First installation

15 cm
15 cm 15 cm
15 cm 15 cm
15 cm 15 cm
15 cm
MAX
28 Drip tray full indicator
29 Coffee grounds container
30 Drip tray
31 Drip tray cover
32 Cord
33 Grease
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.Like with most full-automatic machines,
you first need to brew some coffees to enable the machine to complete its
self-adjustment and get the best tasting coffee.
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3 Note: This machine may only be operated by a properly trained person.
Never let the machine operate unattended.
4 Rinse the water tank. Fill the water tank with fresh water to the MAX level
indication.
5 Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
Note: Do not overfill the bean hopper to avoid damage to the grinder.
Caution: Only use espresso beans. Never use ground coffee, unroasted
coffee beans or caramelized coffee beans, as this may cause damage to
the machine.
Note: Do not add pre-ground coffee, water or coffee beans in the exit
duct.