Herunterladen Inhalt Inhalt Diese Seite drucken

First Installation; Aquaclean Filter; Activating The Aquaclean Filter - Philips Saeco INCANTO HD8921/01 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
English
6

First installation

AquaClean filter

Activating the AquaClean filter

- This is the QR code. Scan this code to access instruction videos on how
to brew the best coffees, how to clean the machine and for a list of
frequently asked questions. (www.saeco.com/care)
- The separate booklet with important safety information.
For first installation, follow the instructions on the separate quick start guide.
Note: This machine has been tested with coffee. Although it has been
carefully cleaned, there may be some coffee residues left. We guarantee,
however, that the machine is absolutely new.
For the best-tasting coffee, you need to brew 5 coffees initially to allow the
machine to complete its self-adjustment.
The machine has been set up to get the best taste out of your coffee beans.
Therefore we advise you not to adjust the grinder settings until you have
brewed 100-150 cups (approx. 1 month of usage).
Note: You can install the AquaClean filter during the first installation
procedure (see separate quick start guide). If you skip installation of the
AquaClean filter at first use, you can install it later by entering the menu (see
'Activating the AquaClean filter').
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 AquaClean filters as indicated in this
user manual, you don't have to descale your machine for up to 5000 cups.
Note: Your machine has to be completely limescale-free before you start to
use the AquaClean filter. If you did not activate the filter during first
installation, you need to descale the machine before you activate the filter.
Note: Always confirm activation of the AquaClean filter in the machine menu
as described below. You also need to do this after replacing the AquaClean
filter. By activating the AquaClean filter in the machine menu, the machine
monitors the number of filters used. When the filter has been replaced 8
times, the machine reminds you to descale it.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Saeco incanto hd8921Saeco incanto hd8922

Inhaltsverzeichnis