SOLIS Steampower pro eco 606 Bedienungsanleitung Seite 54

i n s tr u c t i ons fo r s te a m iro ni n g:
– Set the temperature control dial to a setting between WOOL and LINEN. The boiler
indicator light "ready for use" Ⓑ blinks while the boiler is heating up.
– Wait until the boiler indicator light Ⓑ is lit continuously and the temperature
indicator light on the iron
are hot enough and ready to use.
– To activate the steam jet, press the steam jet button
of the soleplate. On release of the button, the steam jet stops.
WARNING:
When using the appliance for the first time, water droplets
can leak from the soleplate. Therefore, it is advisable to direct the first jet of
steam onto a cotton cloth, laid ready to catch the condensation water.
– If you would like a continuous flow of steam, slide the contin-
Fig. 4
WARNING:
will light up and go out alternately. This means that the electrical heating elements
are turned on to keep the temperature of the iron soleplate and the pressure in the
boiler constant. You can keep on ironing.
54
ï
has gone out. Now the boiler and the iron soleplate
uous steam switch
ously out of the soleplate, even when the button is released.
If you wish to turn the continuous steam off again, slide the
î
switch towards the back (Fig. 4).
ATTENTION:
always switch off the continous steam function first!
During ironing, the temperature indicator light of the iron
ì
and the steam comes out
î
forward, and the steam passes continu-
Befor switching off the appliance,
ï