Basic Use - ACME BH07 Bedienungsanleitung

ready for pairing mode and you can pair the second mobile. Turn off the headset and
turn it on again, both mobiles are ready to use or you can connect with first cell phone
manually.
In order to activate the multi-link function, press the volume + and volume – buttons at
the same time for 3 seconds until the blue LED light stays on for 2 seconds.
Reconnect the paired headset to your phone
Every time the headset is turned on, it will connect to the last connected device
automatically.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
• Ensure that the headset is charged, switched on, paired with and connected to
your phone.
• Ensure that the Bluetooth feature is activated on your phone.
• Check that the headset is within 10 meter (30 feet) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.
• If no pairing is made over a period of time, the headset will revert from the pairing
mode. You will then have to turn off the headset and operate it again.

Basic use

Call handling
To make a call. Use your phone in the normal way when the headset is connected
to your phone.
To answer a call. Press the Answer/end (MFB) key, or use the phone keys.
To end a call. Press the Answer/end (MFB) key or use the phone keys.
Reject a call. When there is an incoming call, press and hold the MFB button for 3
seconds until you can hear a beeping sound from the headset.
Voice dialing (dialing a number by saying a name). It is possible to make a call
directly from the headset using voice recognition. To use this voice dialing function
your mobile phone must be able to provide this option and corresponding voice
GB
5