Basic Use - ACME BH411 Bedienungsanleitung

• Put the earphones in the charging
case and close the cover to charge.
During charging, the indicators will
show a steady red colour. When the
battery is fully charged, the red light
will turn off.
• Use the USB charging cable to
charge the charging case. The
indicator light of the charging case
is red when being charged. It will
turn off automatically after being
fully charged.
Fully charged earphone batteries have the power for up to 3 hours of
playback time (9 hours more from the charging case). When the batteries are
running out of power, a voice prompt will be heard. This indicates that the
earphones need to be charged as soon as possible.
Pairing
Automatic (with the charging case) method:
• Remove the two earphones from the charging case* and wait for 10 seconds. The two
earphones will power on and enter to the pairing mode automatically. A fast-blinking
red/blue LED light on the right earphone and a slowly-blinking blue LED light on the
left one will indicate that the earphone is ready to pair with your device.
• Turn on the Bluetooth function on your device, select BH411 from the list, and pair
the earphone.
• A voice prompt will be heard from the right earphone saying that the earphones are
connected.
*The charging case must be closed tightly before opening it and removing
the earphones.
Manual (without the charging case) method:
• When both earphones are in an off state, press and hold the power (multifunction)
button of both for 3-4 seconds. A voice prompt will be heard from both earphones
saying that left and right channels are successfully connected. Then a voice prompt
will be heard saying which earphone is the left one ("left channel") and which is the
right one ("right channel"), and after that in the right earphone you will hear the voice
prompt of "pairing".
• Turn on the Bluetooth function on your device, select BH411 from the list, and pair
the devices.
• A voice prompt will be heard from the right earphone saying that the earphones are
connected.
If pairing is successful, the earphones will enter to an idle mode and the blue
lights will flash once every 5 seconds in different earphones. If no Bluetooth
connection is made within 10 minutes, the earphones will turn off
automatically.

Basic Use

To switch on,
(multifunction) button for 3 seconds for both earphones at the same time until the blue
indicator light flashes 3 times with the voice prompt of "power on".
To switch off,
(multifunction) button of one earphone (left or right) for 3 seconds to power off both
earphones until the red indicator light flashes 3 times with the voice prompt of "power
off" or just put them back into the charging case.
Automatic reconnection
When both earphones are in an off state, remove them from the charging case at the
same time, and they will reconnect automatically. And the right (main) earphone will
reconnect to the paired device automatically.
when both earphones are in an off state, press and hold the power
when both earphones are in an on state, press and hold the power
5