Get Started - ACME BH07 Bedienungsanleitung

GB

Get started

Overview
The headset contains the following parts as shown in the figure:
(1) Multi-function button (MFB).
(2) LED indicator
(3) Microphone
(4) Earphone
(5) Charging jack
(6) + button: Volume up
(7) – button: Volume down
Charging the headset
The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset has low power, a blue LED flashes. Connect the USB cable to a
computer USB port and the USB cable plug to the charging jack of the headset. Red
LED is on while charging. It takes about 1.5 hour to charge the battery fully. When
charging is complete, the red LED will be off.
Switch the headset on or off
To switch on/off, press and hold the MFB for 4 seconds.
Pair the headset with a compatible phone
1. Ensure the headset is turned off, otherwise turn it off first and then press and hold
MFB button for 6~7 seconds until LED flashes red and blue alternately
2. Activate your cell phone's Bluetooth function and set your cell phone to search
for Bluetooth devices within range, and select "BH07" from the list of devices
shown;
3. According to the indication, enter password or PIN No.: "0000";
4. If the pairing is successful, the headset's blue light will flash every 6 seconds. The
headset's name appears in the phone menu where you can view the currently
paired Bluetooth devices.
Note for multi-link use: in order to pair a second mobile device, press the volume +
button for 4 seconds until the red and blue light flashes alternately, the headset is then
4