Care And Maintenance - ACME BH07 Bedienungsanleitung

GB
samples must have been recorded.
• Enable the voice recognition function of your mobile and set the mobile to
hands-free mode.
• When no call is in progress, press the volume – button for 3 seconds until you can
hear a beeping sound from the headset.
• Say the name of the person you wish to call in a clear emphatic voice.
Redial. Double press the MFB key and you will hear a beeping sound from the
headset. Release the button and the headset will call up the last dialed telephone
number.
Microphone Mute. While using the headset, press and hold the volume – button
for 3 seconds to mute the microphone. Press it again to activate the headset
microphone.
Adjust the earphone volume. Press the volume + key to increase or – to decrease
the volume during a call.
Switch the call between mobile and headset. In call mode, press and hold the
MFB key for about 2 seconds until there is a beeping sound from the headset. The
call will be switched from the headset to the mobile or vice versa.

Care and maintenance

Read the following recommendations before using the headset. Following these
you will be able to enjoy the product for many years.
•
Do not expose the headset to liquid, moisture or humidity to avoid the product's
internal circuit being affected.
•
Don't use abrasive cleaning solvents to clean the headset.
•
Do not expose the headset to extremely high or low temperature as this will
shorten the life of electronic devices, destroy the battery or distort certain plastic
parts.
•
Don't dispose of the headset in a fire as it will result in an explosion.
•
Don't expose the headset to contact with sharp objects as this will cause scratches
and damage.
•
Don't let the headset fall down onto the floor. The internal circuit might get
damaged.
•
Don't attempt to disassemble the headset as it may get damaged if you are not
professional.
6