Safety Notes; Technical Data - m-e VDV-503 Betriebsanleitung

VDV-503 | ENGLISH
Activating monitor / switching between additional cameras
Using the monitor button (2), you can monitor the entrance area at any
time without waiting for someone to press the bell push. The system is
switching off automatically after 60 seconds.
NOTE: If an additional camera is connected (or multiple external units),
it can also be activated using the monitor button. Pressing the monitor
button once activates the camera of the external unit, pressing it a
second time switches to the first additional camera, and pressing it a
third time switches to the second additional camera. Once you flipped
through all the cameras the image from the first camera is shown again.
The monitor can only be switched off by pressing the voice button twice
or waiting approximately 60 seconds for the system to automatically
return to standby mode.
Adjust monitor brightness
You can use the brightness button (13) to adjust the monitor brightness
to seven levels. Each time you press the brightness button, the brightness
level increases; the brightness returns to the lowest level when it reaches
level seven.
Adjust the monitor contrast
You can use the contrast button (12) to adjust the monitor contrast to
seven levels. Each time you press the contrast button, the level increases;
GB
the contrast returns to the lowest level when it reaches level seven.
Adjust the colour saturation of the monitor
You can use the colour saturation button (11) to adjust the monitor
colour space to seven levels. Each time you press the colour saturation
button, the level increases; the colour space returns to the lowest level
when it reaches level seven.

TECHNICAL DATA

Operating voltage:
Power consumption:
Temperature range:
Maximum air humidity:
Screen size:
Monitor resolution:
Dimensions:
NOTES
The functionality of the unit can be affected by the influence of strong
static, electrical or high frequency fields (discharging, mobile phones,
radios, microwaves).
15 V DC
270 ± 50 mA
0 to +50°C
85%
8.9cm (3.5'')
320 x 240
98 x 262 x 23 mm (wxhxd)
Cleaning and maintenance
Always disconnect mains powered units from the mains supply before
cleaning (disconnect the plug). The unit housing can be cleaned using
a soapy soft cloth. Do not use any abrasive materials or chemicals.
Remove dust build-up from ventilation slits using a brush and clean up
using a vacuum cleaner. Do not hold the vacuum cleaner nozzle directly
against the unit.

SAFETY NOTES

The warranty will be null and void in case of damages arising from
violations of these operating instructions. We are not liable for
consequential damages!
We accept no liability for material damages or injuries arising from
inappropriate use or violation of the safety instructions. In such cases
all warranty claims are null and void!
For reasons of safety and licensing (CE), unauthorised conversion and /
or modification of the product is prohibited.
Do not take the product apart! There is a danger of lethal
electric shock!
Do not leave packaging material lying about since plastic foils and
pockets and polystyrene parts etc. could be lethal toys for children.
The device is suitable only for dry interior rooms (not bathrooms and
other moist places). Do not allow the device to get moist or wet. There
is a danger of lethal electric shock!
In industrial institutions, the accident prevention regulations of the
Association of Commercial Professional Associations for electrical instal-
lations and equipment must be observed. Please consult a specialist
should you have doubts regarding the method of operation, the safety,
or the connections of the device.
Handle the product with care – it is sensitive to bumps, knocks or falls
even from low heights.
2 YEAR LIMITED GUARANTEE
For two years after the date of purchase, the defect-free condition of
the product model and its materials is guaranteed. This guarantee is
only valid when the device is used as intended and is subject to regular
12