Boss GT-001 Bedienungsanleitung Seite 9

4
Editing: Editing the Effects
You can edit the parameters of each effect in the patch. Here we'll show an example of editing the distortion of
the overdrive effect.
1
Select the effect that you want to edit
1.
Choose [EFFECT] " "OD/DS."
2.
Press the [ENTER] button.
(Only if the cursor is located at FX1 or FX2)
Use knob [4] to select the effect type for FX1 or FX2.
2
Edit the values
Change the value that is displayed with knobs [1]–[4].
You can move the page tab with the value knob.
Convenient Quick Settings
If you select a page tab that shows "QS, " you'll be able to easily call up settings
(Quick Settings) that have been saved for each effect.
For details on how to save Quick Settings, refer to "Storing settings by effect
(Quick Setting write)" (p. 9).
What does each knob do?
The function (parameter) of each knob will differ depending on the effect. For a list of all parameters, refer to "Parameter
Guide" (PDF file).
When selecting OD/DS
Knob Operation
[1] TYPE
[2] DRIVE
[3] TONE
[4] E. LEVEL
3
Finish making settings
Press the [EXIT] button a number of times.
You'll be returned to the Play screen.
NOTE
The edits you made here will be lost if you switch patches. If you want to keep the patch you created,
press the [WRITE] button to save your edits as a user patch (p. 8).
Choose an effect using the value knob to move the cursor.
Press the knob to turn the effect on or off.
While Pressing down the knob and rotating it moves the
position of the effect left or right.
[ENTER] button
Explanation
Switches the type of overdrive/distortion.
Adjusts the amount of overdrive/distortion.
Adjusts the tone quality. Higher values produce a sharper tone.
Adjusts the volume when the effect is being applied.
7