Viatom Checkme O2 Bedienungsanleitung Seite 9

2.8 Operation Mode Navigation
The device has two operation modes: Sleep Mode
and Monitor Mode.
Turn on the device, during the icon blinking, press the
button to switch between two modes.
Parameters
Screen
The Sensor
Vibrates
Bluetooth
Report
2.9 Bluetooth Connection
The device Bluetooth will be enabled automatically only
when the screen lights up.
To establish a Bluetooth connection,
Ensure the device screen is on to keep the
1)
device Bluetooth enabled.
2) Make sure the phone Bluetooth is enabled.
3) Run the App, then select the Device ID for the
initial use.
Note: DO NOT PAIR in the settings of your smartphone.
2.10 Add a new device
For the initial use, you need to add a new device.
1) Turn on device, run App, select <Checkme O2>;
Sleep Mode
SpO , PR, Motion
2
Activated by button
When SpO is
2
lower than
threshold set
On when the
screen lights up
Sleep report
8
Monitor Mode
SpO , PR, Steps
2
Always on
When SpO is lower
2
than threshold set；
Or when step goal is
met
Always on
Monitor report