Viatom Checkme O2 Bedienungsanleitung Seite 10

2)
Then input the last 4 digits of SN on the back of
your device main unit.
2.11 Real-time Dashboard
You can check real-time SpO
1) Connect device to App.
2) App->Dashboard.
2.12 Smart Vibration
The vibrator in the sensor will be activated when the
SpO fall below the pre-set value (Threshold). The
2
vibration will stop when the SpO
press the button to stop it.
You can customize the vibration to help you
sleep better. Make sure your device is
connected to App first. Then you can
configure it in App->Settings.
You can switch on or off the vibration.

 You can adjust the Intensity of vibration.
You can adjust the Threshold. If the vibration

disturbs you during sleep too much, you can lower
the Threshold. If you would like to get more
protection from oxygen shortage, you can turn up
the Threshold.
2.13 View Results and Report
In App, you can review all the
history data. Touch a record,
there comes out the detailed
report, which includes analysis
, Pulse Rate in App.
2
recover, or you can
2
9