TW-2B/TW-6/TW-6s
selected function.
Please press the
• Measur – measure function: takes measurements;
• Subst - ubstance function: allows to choose the measured material
• Memory – memory function: recalls the stored measurement values;
• REF PT – reference point function: sets the reference point;
• Off – off function: switches the device off;
• Delete – delete function: deletes the stores measurement values;
• Zero – zeroing function: calibrates the device;
• Resol. – resolution function: switches between the measurement resolution;
• Soft indicates the installed software version.
To select a function please press the
Measure function
After You select this function the display will show the
currently selected material, e.g.
indicator in the first line and
gauge is ready to take measurement.
After You put the sensor against the body of the car
the result of the measurement will be shown in the
second line.To store the result please press the
button when taking the measurement. A
[MENU]
the shown value.
WARNING!
OPERATION MANUAL
FUNKTION
button to switch between the following functions:
Zn/Al
----um
The capacity of the device's memory is 100 results.
Next storages will delete the oldest ones.
OK [MENU]
button.
and the battery
in the second. The
OK
symbol appears next to
*
www.t4w.eu
8