www.t4w.eu
After displaying the company's logo and the device's type, the device switches
automatically to the main menu. You will see on the display
fi rst line and
Memory
selected function.
Please press the
• Measur – measure function: takes measurements;
• Subst - type of substrate
• Memory – memory function: recalls the stored measurement values;
• Off – off function: switches the device off;
• Delete – delete function: deletes the stores measurement values;
• Zero – zeroing function: calibrates the device;
• Resol. – resolution function: changes the measurement resolution.;
To select a function please press the
Measure function
After You select this function the display
will show
Measur
in the second. The gauge is ready to take
um
measurement.
After You put the sensor against the body of the
car the result of the measurement will be shown
in the second line.
15
in the second line. The
FUNKTION
button to switch between the following functions:
in the fi rst line and
symbol indicates the currently
*
button.
OK [MENU]
----
TW-1/TW-1maxi/TW-1s
in the
Measur
OPERATION MANUAL