Gauge Manual - T4W TW-2B Bedienungsanleitung

www.t4w.eu
caption appears in the second line of the display – otherwise the gauge
------
will decalibrate!
WARNING!
not place the sheet on the bodywork). Also, please avoid holding the sheet in Your
hands as this may affect the operation.
Please note that zeroing is worth to be made when the measurement conditions
are changing (e.g. the temperature or humidity rises or falls).
WARNING!
battery You can use a compatible, fully charged accu. 3. If the device seems to
work improperly it can be caused by an empty battery or accu.
To take a measurement please put the device's sensor against the examined
surface. The sensor should adhere as flat as possible. The examined surface
should be clean and smooth, otherwise the measurement may be incorrect.
It is advised to hold the gauge with both hands and press gently towards the
examined surface to eliminate vibration. Usually it takes 1-2 seconds to stabilize
the measurement result.

3. Gauge manual

The device is operated with 2 buttons:
OK [MENU]
• button
returns from them to the main menu, when pressed during the measurement it
memorizes the displayed value;
FUNCTION
• button
between the stored measurement values.
To turn the device on please press the
After displaying the company's logo and the device's type, the device switches
automatically to the main menu. You will see on the display
first line and
Memory
7
While zeroing, the calibration sheet should be
placed on a flat, stable non-metallic surface (e.g. do
1. Use only alkaline batteries as normal batteries
provide unsufficient power. 2. Instead of a alkaline
: turns the device on, accepts the selected functions and
: switches between the functions in the main menu, switches
in the second line. The
OK[MENU] button for about 1 second.
symbol indicates the currently
*
TW-2B/TW-6/TW-6 s
in the
Measur
OPERATION MANUAL