Ec Declaration Of Conformity - Husqvarna PG 530 Bedienungsanweisung

Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 3)
2
Handle right, m/s
2
Handle left, m/s
Note 1: Noise emission in the environment measured as sound power according to EN 60335-2-72. Expected
measurement uncertainty 2,5 dB(A).
Note 2: Sound pressure level according to EN 60335-2-72. Expected measurement uncertainty 2 dB(A).
Note 3: Vibration level according to EN 60335-2-72. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel: +46–36–146500, declares under sole responsibility that the floor
grinder Husqvarna PG 530 dating from 2016 serial numbers and onward (the year is clearly stated on the type plate,
followed by the serial number), complies with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of February 26, 2014 "relating to electrical equipment designed for use within certain voltage limits" 2014/35/EU.
• of June 08, 2011 on the 'restriction of use of certain hazardous substances' 2011/65/EU.
The following standards have been applied: EN 55014-1:2000+A2:2002, EN 55014-2:1997+A1:2001, EN 61000-3-
2:2000+A2:2005, EN 61000-3-3:1995+A2:2005.
The supplied machine conforms to the example that underwent EC type examination.
Gothenburg 13 January 2016
Joakim Ed
Global R&D Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
2
PG 530 (1 ph)
96 96
85 85
2,4 2,4
2,2 2,2
PG 530 (3 ph)
96 96
85 85
2,4 2,4
2,2 2,2
English – 31