Technical Data; Ec-Declaration Of Conformity - Husqvarna PG 400 Bedienungsanweisung

Technical data

Motor Power, kW/hp
Rated current, A
Rated voltage, V
Weight, kg/lbs
Grinding width, mm/inch
Grinding pressure, kg/lbs
Speed, rpm
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A) 89
Vibration levels (see note 3)
2
Handle right, m/s
2
Handle left, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 61029-1. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 61029-1. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the Husqvarna PG
400 SF, Husqvarna PG 280 SF dating from 2010 serial numbers and onwards (the year is clearly stated on the rating plate,
followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equipment" 2006/95/EC.
The following standards have been applied: EN ISO 12100:2003, EN 55014-1:2006, EN 55015-2/A1:2001, EN 61000-3-2:2006,
EN 61000-3-3/A1/A2:2005, EN 13862/A1:2009.
The supplied machine conforms to the example that underwent EC type examination.
Göteborg December 29, 2009
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
16 –
English
TECHNICAL DATA
PG 400 SF
4/5,4
16
400
115/254
400/16
65/143
1400
107
dB(A) 108
WA
3,4
3,4
PG 280 SF PG 280 SF (Single-phase)
3/4 2,2/3,0
16 12,9
400 230
70/154 70/154
280/11 280/11
35/77 35/77
2800 1400
107 107
108 108
89 89
3,4 3,4
3,4 3,4
) in conformity with EN 61029-1.
WA