Key Lock - Sharp KH-6V08BS00-EU Bedienungsanleitung

The assignment of that timer is displayed
always by a flashing Cooking Zone
Indicator. The number of timers running
can be identified by the number of Cooking
Zone Indicators that are statically on.
By toggling , you can display the
timer values for the heater timer and the
minute minder. The assignment is always
indicated by the flashing
Cooking Zone Indicator. If no Cooking
Zone Indicator is flashing, the minute
minder time is shown in the 2-digit Timer
Display.
All heater timers can be erased by
switching off the appliance into the S
Mode using . A minute minder will
not be erased, it will proceed until the
operation runs out.
To erase a timer in Operation Mode, you
first have to select the timer by toggling
the Active/Inactive Timer Button until it is
displayed. The value can be erased in 2
different ways:
· Decrement by sliding your finger across
the panel
appears on the Timer Display.
After reaching the ´00` of a heater timer,
the assigned heater level will be set to ´0`.
The heater timer or minute minder running
out is indicated by a buzzer tone. This
will be erased by pressing any button for
acknowledgement.

Key Lock

Key lock functionality is for blocking and
setting the appliance into safe mode
during operation. Touch modifications as
for example rise heat settings and others
should not be possible. Only switching
the appliance off is possible.
The lock function becomes active, if the
Key Lock button
2 sec. This operation is acknowledged
by a buzzer. After a successful operation
of more than 2 seconds, the Key Lock
Indicator flashes and the heater becomes
locked.
The heater can only be locked in Operating
Mode (B-Mode).
If the heater is locked, only
operated, all other buttons are blocked. If
there is any other button operated in the
blocked mode, the buzzer signal sounds
and the Key Lock Indicator flashes as
an indication for the activated key lock
functionality. Only the switch off by
operation of
switched off the appliance, you can not
until ´00`
restart it again without unlocking it first.
After pressing
Lock indicator will disappear. Now, the hob
control is unlocked and can be operated
in normal order.
EN - 13
is pressed for at least
can be
is possible. If you have
for 2 seconds, the Key