Baumer PosCon ZADM 023H-Serie Bedienungshandbuch Seite 51

4 Type of measurement
General information
• All dark
bright or bright dark changes inside the measuring range indicates an edge.
• An uncovered part of the reflective tape inside the measuring range indicates a bright section.
• A covered part of the reflective tape inside the measuring range indicates a dark section.
• No edge inside the measuring range means no object or an object that covers the whole measur-
ing range.
4.1 Edge position
Edge position left edge
The sensor is measuring the outer most edge on the "L"-side inside the measuring range.
left
right
left right left right
No edge inside the measuring range analog output = 4 mA
An edge inside the measuring range analog output = 4 ... 20 mA
Hole reflective tape covered analog output = 20 mA
Seite / Page 51