Herunterladen Inhalt Inhalt Diese Seite drucken

Klarstein 10009349 Bedienungsanleitung Seite 13

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. A clean coffee maker is essential for making great-tasting coffee. Regularly clean the coffee
maker as specified in the "cleaning and maintenance" section. Always use fresh, cold water in the
coffee maker.
2. Store unused coffee grounds in a cool, dry place. After opening a package of coffee grounds,
reseal it tightly and store it in a refrigerator to maintain its freshness.
3. Do not reuse coffee grounds since this will greatly reduce the coffee' flavor. Reheating coffee is
not recommended as coffee is at its peak flavor immediately after brewing.
4. Clean the coffee maker when over-extraction causes oiliness. Small oil droplets on the surface of
brewed, black coffee are due to the extraction of oil from the coffee grounds.
5. Oiliness may occur more frequently if heavily roasted coffees are used.
1. To fill the kettle, remove it from the power base and open lid by pressing Open lid button, fill with
the desired amount of water to the water kettle. Always fill the kettle between the minimum
(0.6L) and maximum (1.5L) marks in the gauge of kettle. Too little water will result in the kettle
switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press down the switch button. The indicator on the gauge
will light up. Then start to boil the water. The kettle will switch off automatically once the water
has boiled. You can shut off the power by pressing upward the switch at any moment during
boiling water.
4. NOTE: Ensure that switch is clear of obstructions and the lid is firmly closed the kettle will
not turn off if the switch is constrained or if the lid is left open.
5. Lift the kettle from the power base and then pour the water.
NOTE: operate carefully when pouring the water from your kettles boiling water will scald.
6. The kettle will not re-boil until the switch is pressed to the "I" position. Allow to cool for 15~20
seconds before reopening to boil water. The kettle may be stored on the power base when not in use.
NOTE: Ensure power supply is turned off when kettle is not in use.
Should you accidentally allow the kettle to operate without water; the boil-dry protection will automatically
switch it off. If this should occur, allow the kettle to cool before filling with cold water and re-boiling.
1. The toaster and the coffee maker can operate at the same time. The detail operation according to
the above "Toaster operation" and "Coffee maker operation".
2. The coffee maker and the kettle can be used at one time. The detail operation according to the
above "Kettle operation" and "Coffee maker operation".
Note: the toaster and the kettle cannot be used at the same time, once the toaster is operating, the
kettle cannot be used. In opposite, it is the same. There is caution on the end of carriage handle.
Hints for great-tasting coffee
Kettle operation
Combined use
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis