Parkside PBH 1500 D4 Originalbetriebsanleitung Seite 11

tool. Loss of control can
GB
IE
cause personal injury.
NI
Hold power tool by
insulated gripping
surfaces, when
performing an
operation where the
cutting accessory may
contact hidden wiring
or its own cord. Cutting
accessory contacting a
"live" wire may make
exposed metal parts of
the power tool "live" and
could give the operator
an electric shock.
► When working with the
machine, always hold it
firmly with both hands
and provide for a secure
stance. The power tool is
guided more secure with
both hands.
► Secure the workpiece. A
workpiece clamped with
clamping devices or in a
vice is held more secure
than by hand.
8
► Always wait until the
machine has come to
a complete stop before
placing it down. The tool
insert can jam and lead
to loss of control over the
power tool.
Wear a dust mask.
WARNING! TOXIC
DUST!
► Working with harmful/
toxic dusts results in health
hazards for the person
operating the appliance
and for other persons in
the area.
ATTENTION – SERVICE
LINES! DANGER!
Take steps to ensure that
you do not hit any service
lines (electricity, gas,
water) when working
with the electric tool. If
necessary, check with a
PBH 1500 D4