Preface; Index - Husqvarna TS 1000 F Betriebs- Und Wartungsanleitung

Declaration of conformity
Manufacturer, HUSQVARNA CONSTRUCTION
PRODUCTS, 433 81 Gothenburg, Sweden, herewith
declares that the machine TS1000F conforms to the
DIRECTIVES:
•
"MACHINES" modified (89/392/CEE)
•
"LOW VOLTAGE" modified (73/23/CEE)
•
"EMC" (89/336/CEE)
•
"NOISE" (2000/14/CEE)
•
" WASTE ELECTRICAL AND ELECTRNIC
EQUIPEMENT (WEEE) " (2002/96/EC
Christer Carlberg, Operations Manager
Husqvarna Construction Products

Preface

Before leaving our factory every machine passes an
exacting inspection programme in which everything is
checked minutely.
Following the instructions will ensure that your machine
gives long service, in normal operating conditions. The
user advice and spare parts mentioned in this document
are given as an indication, and do not constitute an
undertaking.
No warrantee will be granted in the event of errors or
omissions, or for damage occur-ring during delivery, or
caused by the design or use of the machine. We are very
concerned about the quality of our products and we
reserve the right to make any technical modifications to
improve them, without warning.
This document will:
•
provide the user with: information about the machine
•
information about its possible uses
•
prevent accidents due to unsuitable use, by an
untrained person, during maintenance, repairs,
overhauls, handling or transport
•
improve the reliability and durability of the machine
•
ensure correct use, regular maintenance, and fast
fault finding in order to reduce repair costs and down
time.
The manual
available at the place of work. It
should be read and used by any
person
machine.
CE DECLARATION - INDEX
should always
installing or using

Index

EXPLANATION OF SYMBOLS
Explanation of the symbols.......................................... 2
CE DÉCLARATION
Conformity declaration................................................. 3
Preface ........................................................................ 3
INDEX
Index............................................................................ 3
DESCRIPTION OF THE MACHINE
Description of the machine .......................................... 4
TECHNICAL FEATURES
Technical features ....................................................... 5
INSTRUCTIONS DE SÉCURITÉ
Specific precautions .................................................... 6
DO - DON'T ............................................................... 6
Check before operating ............................................... 7
Gasoline (petrol) powered machine............................. 7
Electric powered machine ........................................... 7
Scrap ........................................................................... 7
STARTING UP
Use .............................................................................. 8
Handling - Transport.................................................... 8
Installing the blade....................................................... 8
Start............................................................................. 8
Stop ............................................................................. 9
MAINTENANCE
Motor Gas maintenance .............................................. 10
General maintenance .................................................. 10
Belt tensioning ............................................................. 10
Important recommendations ........................................ 10
Troubleshooting........................................................... 11
Repairs ........................................................................ 11
Spare parts .................................................................. 11
Warrantee.................................................................... 11
be
the
The instructions for use and spare parts found in this document
are for information only and are not binding.
As part of our product quality improvement policy, we reserve
the right to make any and all technical modifications without
prior notice.
The obligatory technical regulations
in force in the country where the
machine is used must also be
adhered to for maximum safety.
3- English