Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch DCU 220 Betriebsanleitung

en 18 | DCU 220 | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word Probability of
occurrence
DANGER Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation
Attention
!
Information
i
1. Multi-step
2. operation
One-step
e
operation
Intermediate

result
Final result
"
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
CAUTION – risk of injury due to triggering
of the airbag with an engaged DCU 220!
Injuries due to unintentional triggering of the
airbag when attaching (e.g. engaging) the
DCU 220 to the steering wheel.
¶
Do not secure the DCU 220 to the steering
wheel.
Weitergabe sowie Vervielfältigung der Zeich- Rz 10
nungen sind nicht gestattet und müssen
streng vertraulich behandelt werden. Alle ( )
Rechte sind bei ads-tec GmbH nach DIN 34.
Druckdatum/ print date: 17.12.2010
strictly confidential according to DIN 34. File:Airbag Lenkrad + TT13 Doku 130
|
1 689 989 221
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
Explanation
Warns about possible property damage.
Practical hints and other
useful information.
Instruction consisting of several steps.
Instruction consisting of one step.
An instruction produces a visible inter-
mediate result.
There is a visible final result on com-
pletion of the instruction.
2014-11-26
2.

User information

2.1 Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the DCU 220 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Test Equipment". These instruc-
tions must be carefully studied prior to start-up, con-
nection and operation of the DCU 220 and must always
be heeded.
2.3

Electromagnetic compatibility (EMC)

The DCU 220 is a class B product as per EN 55 020.
2.4 R&TTE Directive
The DCU 220 is a class 1 wireless device (R&TTE
1999/55/EC) approved for use in Europe. In France, use
of the DCU 220 is only permissible indoors.
i
In non-European countries the corresponding nation-
al regulations on the operation of wireless devices
in the 2.4 GHz frequency band must be heeded (e.g.
WLAN or Bluetooth).
Robert Bosch GmbH