Electrolux TK140 Benutzerinformation Seite 70

70 www.electrolux.com
5. Unscrew and install the screw on the
opposite side.
6. Install the hinge on the opposite side.
7. Screw the right foot.
8. Unscrew the screws of the door top
hinge.
9. Remove the hinge. Put over the pin in
the direction of the arrow. Install the
hinge on the opposite side.
10. Tighten the hinge.
11. Put the top in position.
1
3
12. Push front the top.
13. Screw both screws on the rear side.
14. Remove and install the handle on the
opposite side.
2
1
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. In that case, wait
for the natural fitting of the
gasket.
In case you do not want to
carry out the above
mentioned operations,
contact the nearest
Authorised Service Centre.
The Authorised Service
specialist will carry out the
reversibility of the doors at
your cost.
2
3