Door Reversibility - Electrolux TK140 Benutzerinformation

9.3 Location
It must be possible to
disconnect the appliance
from the mains power supply;
the plug must therefore be
easily accessible after
installation.
The appliance should be installed well
away from sources of heat such as
radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around
the back of the cabinet. To ensure best
performance, if the appliance is positioned
below an overhanging wall unit, the
minimum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below
overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet
at the base of the cabinet.
100 mm
15 mm

9.4 Door reversibility

1. Unscrew both screws on the rear side.
2. Push back the top and lift it.
3. Unscrew the left foot.
15 mm
4. Unscrew the screws of the door
bottom hinge. Remove the hinge. Put
over the pin in the direction of the
arrow.
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
ENGLISH 69