Lightmaxx Slim Spot ARC Bedienungsanleitung Seite 17

Warning! (IP-Class)
This device has protection class IP65. The fi rst digit (6) indicates protection
against foreign bodies. Products with the code 6 are dustproof and comple-
tely protected against contact. The second digit (5) determines the protection
against water. The code 5 describes here the protection against jet water from
any angle.
Installation:
Always check the device for damage before use. Use the original packaging or suitable transport or
storage packaging to protect the product optimally from infl uences such as dust or moisture, etc.
when not in use.
The device can be installed either standing or hanging. The mounting must always be done on a
solid, approved support or an appropriate surface. Use the opening of the brackets to attach the
device. Always create a second, separate safeguard for the device, e.g. by means of a safety wire.
All work on the device (e.g. installation) should always be carried out from a stable and approved
platform. Make sure that the area below you is closed off.
Please note that the use of this device with a dimmer is not possible!
Warning! (Risk of injury from falling)
It must be ensured that the device complies with all legal standards and re-
gulations in the respective country of use. Ensure that the device is always
secured by a second mounting cable (e.g. Safety).
Warning! (Overheating)
The maximum permissible ambient temperature of this device is 40° C.
Ensure that the unit is always adequately ventilated.
Warning! (Using Stands)
As soon as the device is mounted on a stand, a safe and fi rm base must
always be ensured. Ensure that the maximum permissible load capacity of
your tripod is not exceeded.
17