Velleman EXCITER 250 Bedienungsanleitung

VDP250SC6M – 'EXCITER 250' 6-CHANNEL PROFESSIONAL SCANNER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for having chosen a HQ-POWER 250W six channel scanner. You will see you have acquired a powerful
and versatile device. The VDL250SC6M features 6 DMX channels, creating a fast moving effect. Unpack the device.
Please read the manual thoroughly before bringing this device into service. Please check carefully that there is no
damage caused by transportation. Should there be any, consult your dealer and don't install this device.
Every person involved with the installation, operation and maintenance of this device has to be qualified and carefully
follow the instructions of this manual.
Features
• 7 colours + white + rainbow effect in both directions
• 7 gobos + open + blackout + shutter
• Gobo rotation
• Strobe (1-10 Hz)
• DMX control, music control and master/slave control
• Fuzzy-sound control: program continues automatically even during periods without music
• Digital display
• Manual focus
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this
user manual.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.