Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction & Features
Thank you for buying the VDP150BR3! Read this manual carefully before bringing the device into service.
The VDP150BR3 features a colour wheel with 13 gobos with 10 colours, 2 bicoloured gobos + white, rainbow effect
and dynamic pan/tilt functions. The device is controlled through 3 DMX channels and creates a fast-changing effect.
Make sure that the device was not damaged in transit. If it was, don't install the device and contact your dealer.
Features :
• Pan 180° / tilt : left – right
• 13 gobos with 10 colours + 2 bicoloured gobos + white
• Shaking gobos and music-controlled gobo change
• Strobe: 0~5Hz
• Automatic program or music-controlled operation
• Display: digital address and function setting
• High speed pan & tilt movements
• Display turns 180° when necessary
• DMX mode, music-controlled mode or master-slave synchro mode
2. Safety Instructions
Be very careful during the installation : touching live wires can
cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up
Keep this device away from rain and moisture
Unplug the mains lead before opening the housing
• Everyone involved with the installation, operation and maintenance of this device has to be qualified and follow
the instructions of this manual meticulously
• Damage caused by disregarding certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is essential, therefore, that the device be earthed. Have this device
installed by a qualified technician.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
VDP150BR3
VDP150BR3 – SPACE ROLLER 150
1
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Velleman SPACE ROLLER 150

  • Seite 21: Limpieza Y Mantenimiento

    Resistencia de aislamiento 2Mohm Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. VDP150BR3 – SPACE ROLLER 150 1. Einführung und Eigenschaften Danke für den Kauf des VDP150BR3! Lesen Sie vor Inbetriebnahme diese Bedienungsanleitung sorgfältig durch.
  • Seite 22: Sicherheitsvorschriften

    • Blicken Sie niemals direkt in die Lichtquelle da bei empfindlichen Menschen epileptische Anfälle ausgelöst werden können. • Beachten Sie, dass Schäden, die durch manuelle Veränderungen an diesem Gerät verursacht werden, nicht unter den Garantieanspruch fallen. Halten Sie Kinder und Unbefugte vom Gerät fern. VDP150BR3 VELLEMAN...
  • Seite 23: Allgemeine Richtlinien

    Unterplatte. 2. Entfernen Sie die alte Lampe und bringen Sie eine neue ein. 3.Schließen Sie den Deckel und schrauben Sie die Schrauben wieder fest. Bemerkung: Schalten Sie das Gerät niemals ein, ohne vorher den Deckel geschlossen zu haben. VDP150BR3 VELLEMAN...
  • Seite 24 • Die Installation muss vor Inbetriebnahme von einem Experten genehmigt werden. 5. Bedienungsanweisungen a) DMX-Steuerung Verbinden Sie die 3-polige XLR-Ausgangsbuchse Ihrer Steuerung mit dem 3-poligen Eingangsstecker des VDP150BR3. Sie können verschiedene VDP150BR3 seriell verbinden. Verwenden Sie ein abgeschirmtes Kabel mit XLR- Ein- und Ausgänge. Bitte siehe Abbildung. VDP150BR3 VELLEMAN...
  • Seite 25 Display ↑/Display ↓ Kanal Beschreibung Funktion Gobo/Farbe/Strobokanal geschlossene Blende Gobo/Farbe/Strobokanal Strobo-Effekt (slow → fast) Gobo/Farbe/Strobokanal geöffnete Blende Gobo/Farbe/Strobokanal Gobo 1 Gobo/Farbe/Strobokanal Gobo 2 Gobo/Farbe/Strobokanal Gobo 3 Gobo/Farbe/Strobokanal Gobo 4 Gobo/Farbe/Strobokanal Gobo 5 Gobo/Farbe/Strobokanal Gobo 6 Gobo/Farbe/Strobokanal Gobo 7 VDP150BR3 VELLEMAN...
  • Seite 26: Reinigung Und Wartung

    5. Verwenden Sie zur Reinigung ein feuchtes, fusselfreies Tuch. Verwenden Sie auf keinen Fall Alkohol oder irgendwelche Lösungsmittel. 6. Außer Lampen gibt es keine zu wartenden Teile. (siehe “4. Installation ” auf Seite 23-24). 7. Bestellen Sie eventuelle Ersatzteile bei Ihrem Fachhändler. VDP150BR3 VELLEMAN...
  • Seite 27: Technische Daten

    F 3A, 250V AC (5x20mm) (Artikelnummer FF3) Sicherung Abmessungen 450 x 190 x 190mm Gesamtgewicht 4.3kg Lampe 1 x 15V / 150W, EFR GZ6.35 (Artikelnummer LAMP150/15 (PHILIPS) oder LAMP150/15E) Max. Umgebungstemperatur T 45°C Isolationswiderstand 2Mohm Alle Änderungen vorbehalten. VDP150BR3 VELLEMAN...

Diese Anleitung auch für:

Vdp150br3

Inhaltsverzeichnis