Emos E3003 Bedienungsanleitung Seite 5

4. Order of languages for days of the week: EN – GE – IT – FR – NE – ES – DA.
Temperature Trends
The arrow shows the trend of temperature measurement values on the specific sensor or station.
The arrow is located in the square next to temperature readings.
temperature trend indicator
rising constant falling
Nice Environment Icon – Smiley
If humidity is between 40–70 % RH and temperature between 20 and 27 °C, the nice environment icon
will be shown.
If humidity is lower than 40 % RH, the dry environment icon will be shown.
If humidity is higher than 70 % RH, the humid environment icon will be shown.
If temperature is not between 20–27 °C and humidity is not between 40–70% RH, no icon will be displayed.
Weather Forecast
The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24
hours for an area within the range of 15–20 km. The accuracy of weather forecast is 70–75 %. As the
weather forecast may not always be 100 % accurate, neither the manufacturer nor the seller can be
held responsible for any loss caused by an incorrect forecast. When you first set, or reset the weather
station, it takes about 12 hours before the weather station begins forecasting correctly. The weather
station displays 4 weather forecast icons.
Sunny Partly cloudy Cloudy Rain
Note: The currently displayed icon indicates a forecast for the next 12–24 hours. It may not reflect the current
state of the weather.
Moon Phases
Icons for the phases of the moon are as follows:
Waxing Waxing Waning Waning
New moon First quarter Full moon Last quarter
crescent gibbous gibbous crescent
Alarm Settings
The weather station allows the setting of one alarm.
Press the MODE button to choose alarm on – off. Your choice will be indicated by bell icon.
Long press the ALARM button and use UP/DOWN buttons to set the desired alarm time.
Move between values using the ALARM button.
When displaying or adjusting the alarm time, AL will be displayed on the right next to the minute value.
Alarm beeping modes:
0–8 seconds – one beep per second
9–24 seconds – two beeps per second
25–56 seconds – three beeps per second
After 57 seconds – continuous beeping up to 2 minutes
Snooze Function
The alarm ringing can be delayed by 5 minutes using the SNOOZE button – slightly pressing the top
of the station downwards.
Press the button when the alarm starts ringing. The zZ icon will flash.
5