Install The Hardware - Axis Q87-E Dual PTZ Installationsanleitung

AXIS Q87-E Installation Guide

Install the Hardware

For information on the cameras' connectors, LED behaviors etc., see the respective User Manuals.
Install the Power Supply (sold separately)
The mains supply shall be disconnected during installation.
The power supply specified with the product shall be used. Using any other power supply will void the war-
ranty and could leave the unit at a risk.
The day/night sensor is attached to the power supply (sold separately). If using the day/night sensor, place
the power supply so that the sensor can track the changes in daylight.
1. Install the power supply according to the instructions supplied with the power supply.
Page 7