Axis Q87-E Dual PTZ Installationsanleitung Seite 14

Page 14
Install the Counterweights
1. Unscrew the bottom cover screws and remove the top cover, see illustration on page 15.
2. Attach the counterweights to the bottom cover using the supplied screws and washers (torque 4 Nm).

Apply Loctite 243 threadlocker on the screws.
3. Secure the counterweights using the supplied grub screws (torque 4 Nm).
AXIS Q87-E Installation Guide
2
1
2
3
4
5
1 Bottom cover
2 Grub screw (4x)
3 Washer (4x)
4 Screw (4x)
5 Counterweight (2x)