Axis Q87-E Dual PTZ Installationsanleitung Seite 18

Page 18
Access the Video Stream
Use the tools provided on the Installation and Management Software CD to assign an IP address, set the password
and access the video stream. This information is also available from the support pages on www.axis.com/techsup
Focus Adjustment - AXIS Q1921/AXIS Q1922
If required, follow these instructions to focus the thermal network camera:
1. Unscrew the stop screw on the lens, using a slotted screwdriver 1.8 mm.
2. Focus the camera to the appropriate distance. See the table below for recommended focus distances for
achieving optimal focus both for near focus and infinity.
Camera and lens
AXIS Q1921
AXIS Q1922
3. Secure the stop screw.
The network camera has a lens with autofocus and cannot be adjusted manually.
Stop screw
35 mm
22 m (72 ft.)
33 m (110 ft.)
60 mm
60 m (200 ft.)
90 m (300 ft.)
AXIS Q87-E Installation Guide