Herunterladen Inhalt Inhalt Diese Seite drucken

Dimplex DF2608-EU Bedienungsanleitung Seite 13

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 85
Maintenance
To access the upper light bulb
area:
1. Slide fireplace out of mantel
2. Lay unit on it's back for safe
removal of front glass.
3. Remove four Phillips screws
from right side of trim.
4. Remove trim.
5. Slide glass to the right side
of the fireplace to remove
(Figure 6).
6. Upper bulbs located in the
upper left and upper right
corners of fireplace.
7. Remove upper light block by
removing the four (4) mount-
ing screws.
8. Unscrew bulbs counter clock-
wise.
9. Insert new bulbs.
10. Re-install upper light bracket.
11. Lay unit on it's back slide
front glass back into position
and attach trim.
Glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass may col-
lect dust particles; these can be
removed by dusting lightly with a
clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
any surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm
water only to clean painted sur-
faces of the electric fireplace. Do
not use abrasive cleaners.
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Df2608-au6904700000

Inhaltsverzeichnis