Additional Safety Instructions; Noise And Vibration - Flex CHE 5-40 SDS-max Originalbetriebsanleitung

Safety instructions for hammers
 Wear ear protectors. Exposure to noise
can cause hearing loss.
 Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause
personal injury.
 Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may
make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.

Additional safety instructions

 Use suitable detectors to determine if
utility lines are hidden in the work area
or call the local utility company for
assistance. Contact with electric lines
can lead to fire and electric shock.
Damaging a gas line can lead to
explosion. Penetrating a water line
causes property damage or may cause
an electric shock.
 When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is
guided more secure with both hands.
 Secure the workpiece. A workpiece
clamped with clamping devices or in a
vice is held more secure than by hand.
 Do not use the power tool if it has
a damaged power cord. Do not touch
the damaged power cord and pull out
the mains plug if the power cord is
damaged during work. Damaged power
cords increase the risk of an electric shock.
 Only use tools with SDS-max tool holder.
Pull on the tool to check that it is locked
properly.
 Have a damaged dust cap replaced
immediately. The dust cap prevents the
ingress of dust into the tool holder.
12
 Dust released from materials, such as
lead paints, some types of wood, minerals
and metal, may be hazardous to the
operator or people in the vicinity. Inhaling
or touching such dust may result in respira-
tory diseases and/or allergic reactions.
– Ensure the workplace is well
ventilated.
– If possible, use external dust
extraction.
– It is recommended to wear a respirator
mask belonging to filter class P2.
 Do not work on materials which release
hazardous substances (e.g. asbestos).
 Identify the power tool with stickers only.
Do not drill any holes into the housing.
 The mains voltage and the voltage
specifications on the rating plate must
correspond.

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power
tool is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty K:
Total vibration value:
– when hammer drilling:
– Emission value a
– Uncertainty K:
– when chiselling:
– Emission value a
– Uncertainty K:
ATTENTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
CHE 5-40 SDS-max
: 96 dB(A);
pA
: 107 dB(A);
WA
3 dB.
: 8.9 m/s
h
1.5 m/s
: 14.2 m/s
h
1.5 m/s
2
2
2
2