Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PRINTER
OPERATING INSTRUCTIONS
JT-H200PR
Model No.
Series
Contents
Read Me First ...................... 2
1. Getting Started ................. 3
2. Operation.......................... 7
3. Appendix .......................... 9
Einführung ............................ 13
1. Vorbereitung ..................... 14
2. Betrieb .............................. 18
3. Anhang ............................ 20
Français
À lire en premier .................. 24
1. Commençons ................... 25
2. Utilisation.......................... 29
3. Annexe ............................. 31
For USA ............................... 35
For CANADA ....................... 36

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Panasonic JT-H200PR-Serie

  • Seite 1: Inhaltsverzeichnis

    PRINTER OPERATING INSTRUCTIONS JT-H200PR Model No. Series Contents English Read Me First ...... 2 1. Getting Started ....3 2. Operation......7 3. Appendix ......9 Deutsch Einführung ......13 1. Vorbereitung ..... 14 2. Betrieb ......18 3. Anhang ......20 Français À...
  • Seite 2: Read Me First

    Read Me First Introduction Thank you for purchasing the JT-H200PR series Panasonic Printer. This manual describes the instructions for the printer. Please read this manual carefully before using this product. This Printer is equipped with “Bluetooth” wireless communication. [Class1 Device] 0560 What’s in the Box?
  • Seite 3: Getting Started

    1. Getting Started ■ ■ ■ ■ Precautions [ Printer:JT-H200PR-∗∗ ] 1. Avoid Radio Frequency Interference Do not place the printer near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the printer. 3. Keep Small Objects Away Do not insert paper clips or other small objects into printer.
  • Seite 4 ■ ■ ■ ■ Precautions [ Battery Pack:JT-H100DP-50 ] 1. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of explosion. 2. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
  • Seite 5 ■ ■ ■ ■ Precautions [ Battery Charger:JT-H100CG-55 ] 1. Keep Small Objects Away Do not insert paper clips or other small objects into charger. There is the risk of heat or fire. 2. Do Not Disassemble the Charger Do not attempt to disassemble the charger. There is the risk of heat or fire. 3.
  • Seite 6 ■ ■ ■ ■ Name of each part & function Paper Out Power Status LED Paper Cover Switch Lever Status Feed Receiving IrDA I/F Receiving LED Feed (Press button to feed paper) Paper Cover Battery Cover Lever Indicate Status Normal 1.
  • Seite 7: Operation

    2. Operation ■ ■ ■ ■ Battery Installation <Open Battery Cover> 1) Slide the Battery Cover Lever 2) Pull the Battery Cover up 3) Open the Battery Cover 4) Slide and insert the Battery completely to the printer <Close Battery Cover> 1) Close the Battery Cover 2) Push down the Battery Cover 3) Slide the Battery Cover Lever...
  • Seite 8 ■ ■ ■ ■ Paper Installation 1) Slide the Paper Cover Lever 2) Open the Paper Cover 3) Install Paper (Paper must be tightly rolled and be confirmed that dust/sand is not on.) 4) Close the Paper Cover (Make sure that the Cover is closed completely) Paper ■...
  • Seite 9: Appendix

    3. Appendix ■ ■ ■ ■ Troubleshooting Symptom Possible Cause Action 1.Has the battery fully inserted? 1.Charge the battery pack. No Power in Printer 2.Is the Power Switch on? 2.Move the Power Switch on. 1.Is the power turned on? 1.Turn on power. 2.Is the paper set correctly? 2.Check the print paper setting.
  • Seite 10 *1: The battery is a consumable item therefore consumption and life time is just an indication and may vary depending on usage and environment conditions. *2: JT-H100DP-50; Europe version. Please contact Panasonic sales office for the North America version battery.
  • Seite 11 ■ Specifications [ Battery Charger:JT-H100CG-55] Items Description Specifications LED Indication Power LED (Red) Power-on : lights up Charger LED 1) Charging, Output short, (Green: X 2 (Slot)) Abnormal temperature : 1Hz blinking 2)Complete charging : lights up continuously 3) No good mode : off Charging Charging time Charging 2-battery :Approx.
  • Seite 12 Hereby, we declare that this printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at http://www.doc.panasonic.de Comliance Notice – CE Mark This equipment is in conformance with the reuirements of European Council Directive listed below: - R&TTE Directive 1999/5/EC...
  • Seite 13: Einführung

    Einführung Einführung Vielen Dank, dass Sie sich für den Kauf eines Panasonic-Druckers der Baureihe JT-H200PR entschieden haben. Dieses Handbuch beschreibt die Bedienung des Druckers. Bitte lesen Sie diese Bedienungsanweisung vor dem Gebrauch dieses Produktes sorgfältig durch. Dieser Drucker ist mit “Bluetooth” für drahtlose Kommunikation ausgerüstet.
  • Seite 14: Vorbereitung

    1. Vorbereitung ■ ■ ■ ■ Vorsichtsmaßnahmen [ Drucker :JT-H200PR-∗∗ ] 1. Störende Radiofrequenzen vermeiden Den Drucker nicht in der Nähe eines Fernseh- oder Radiofunkgeräts aufstellen. 2. Nicht belasten Keine schweren Gegenstände auf den Drucker legen. 3. Kleine Gegenstände fernhalten Keine Büroklammern oder andere kleine Gegenstände in den Drucker stecken.
  • Seite 15 ■ ■ ■ ■ Vorsichtsmaßnahmen [ Batterie:JT-H100DP-50 ] 1. Wärmeeinfluss vermeiden Die Batterie nicht ins Feuer werfen oder extremer Hitze aussetzen. Es besteht Explosionsgefahr. 2. Von anderen Gegenständen fernhalten Die Batterie nicht mit Gegenständen wie Halsketten oder Haarnadeln zusammen tragen oder lagern.
  • Seite 16 ■ ■ ■ ■ Vorsichtsmaßnahmen [ Batterieladegerät :JT-H100CG-55 ] 1. Kleine Gegenstände fernhalten Keine Büroklammern oder andere kleine Gegenstände in das Ladegerät stecken. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 2. Das Ladegerät nicht zerlegen Nicht versuchen, das Ladegerät zu zerlegen. Es besteht Hitze-, Feuer- oder Explosionsgefahr.
  • Seite 17 ■ ■ ■ ■ Bezeichnung und Funktion der Teile Papierausgabe EIN /AUS Schalter Sicherung der Status- LED Papierabdeckung Status Feed Receiving Empfangs-LED IrDA-Schnittstelle (Für Papiervorschub Knopf drücken) Papierabdeckung Batteriefachabdeckung Element Anzeige Status Normal 1. Strom ein (leuchtet 5 Sekunden), Grünes Licht 2.
  • Seite 18: Betrieb

    2. Betrieb ■ ■ ■ ■ Einsetzen der Batterie <Batteriefachabdeckung öffnen> 1) Die Sicherung der Batteriefachabdeckung nach vorn schieben. 2) Die Batteriefachabdeckung nach oben ziehen. 3) Die Batteriefachabdeckung öffnen. 4) Die Batterie einsetzen. <Batteriefachabdeckung schließen> 1) Die Batteriefachabdeckung zuklappen. 2) Die Batteriefachabdeckung nach unten schieben.
  • Seite 19 ■ ■ ■ ■ Papier einsetzen 1) Die Sicherung der Papierabdeckung nach hinten schieben. 2) Die Papierabdeckung öffnen. 3) Papier einlegen (das Papier muß fest aufgerollt und frei von Staub/Sand sein). 4) Die Papierabdeckung schließen (darauf achten, daß die Abdeckung vollständig geschlossen wird.) Papier ■...
  • Seite 20: Anhang

    3. Anhang ■ ■ ■ ■ Störungsbeseitigung Problem Mögliche Ursachen Gegenmaßnahmen Keine Spannung 1.Ist die Batterie korrekt eingesetzt? 1.Die Batterie aufladen. am Drucker 2.Ist der Drucker eingeschaltet? 2.Den Drucker einschalten. 1.Ist der Drucker eingeschaltet? 1. Den Drucker einschalten. 2.Ist das Papier korrekt eingesetzt? 2.
  • Seite 21 *1 Da die Batterie ein Verbrauchsgegenstand ist, sind die Angaben für Verbrauch und Gebrauchsdauer nur ungefähre Werte und können in Abhängigkeit von den Betriebs- und Umgebungsbedingungen unterschiedlich sein. *2 JT-H100DP-50; Europaversion. Bitte kontaktieren Sie die Panasonic Vertreibsniederlassung In Nordamerika für die nordamerikanisch Version der Batterie. 21...
  • Seite 22: Technische Daten

    ■ Technische Daten [ Batterieladegerät :JT-H100CG-55 ] Position Bezeichnung Technische Daten LED-Anzeige Betriebs-LED (rot) Spannung ein, aus LED Aufladen (grün x 2 1) Aufladen, Ausgang kurz, Abnormale Temperatur: blinkt 1Hz (Ladefach)) 2) Aufladen beendet: leuchtet 3) Störung: aus Aufladen Ladedauer 2 Batterien aufladen: ca.
  • Seite 23 ■ ■ ■ ■ Konformitätserklärung Hiermit erklärt Panasonic System Solutions Company, Matsushita Electric Industrial Co, Ltd. Yokohama, Kanagawa, Japan, dass sich das Gerät JT-H200PR in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EC befindet. Die Konformitaetserklaerung kann eingesehen werden unter : http://www.doc.panasonic.de Konformitätserklärung –...
  • Seite 24: À Lire En Premier

    À lire en premier Introduction Merci d'avoir fait l'achat de l'imprimante Panasonic des séries JT-H200PR. Ce manuel décrit les instructions relatives à l'imprimante. Veuillez lire attentivement ce mode d'emploi avant l'utilisation de ce produit. Cette imprimante est équipée de la transmission sans fil "Bluetooth". [Class1 Device] 0560 Qu'est-ce qu'il y a dans la boîte ?
  • Seite 25: Commençons

    1. Commençons ■ ■ ■ ■ Mesures de précaution [Imprimante:JT-H200PR-∗∗ ] 1. Éviter l'interférence des radiofréquences Ne jamais mettre l'imprimante près d'une télévision ou d'un récepteur radio. 2. Éviter l'empilement Ne pas poser des objets lourds sur l'imprimante. 3. Tenir les petits objets éloignés Ne pas insérer de trombones ou d'autres petits objets dans l'imprimante.
  • Seite 26 ■ ■ ■ ■ Mesures de précaution [Bloc de batterie: JT-H100DP-50 ] 1. Éviter la chaleur Ne pas jeter pas le bloc de batterie dans un feu ni l'exposer à une chaleur excessive. Il y a risque d'explosion. 2. Maintenir les articles éloignés Ne pas mettre le bloc de batterie avec des articles tels que des colliers ou des épingles à...
  • Seite 27 ■ ■ ■ ■ Mesures de précaution [Chargeur de batterie: JT-H100CG-55 ] 1. Tenir les petits objets éloignés Ne pas insérer de trombones ou d'autres petits objets dans le chargeur. Il y a risque de production de chaleur ou d'incendie. 2.
  • Seite 28 ■ ■ ■ ■ Nom de chaque pièce et fonctionnement Sortie papier Interrupteur Lampe du statut Levier de capot d'alimentation de papier Status Feed Receiving IrDA I/F Lampe du réception Avance (bouton-poussoir d'avance de papier) Capot de papier Levier de couvercle de batterie Lampe Voyant...
  • Seite 29: Utilisation

    2. Utilisation ■ ■ ■ ■ Installation de la batterie < Ouvrir le couvercle de la batterie > 1) Faire coulisser le levier de couvercle de batterie 2) Faire coulisser et ouvrir le couvercle de la batterie 3) Couvercle de la batterie ouvert 4) Introduire la batterie par coulissement complètement à...
  • Seite 30 ■ ■ ■ ■ Installation du papier 1) Faire coulisser le levier de capot de papier 2) Ouvrir le capot de papier 3) Installer le papier (le papier doit être tendu et dénuer de poussière/sable) 4) Fermer le capot de papier (S'assurer que le capot est complètement fermé) Papier ■...
  • Seite 31: Annexe

    3. Annexe ■ ■ ■ ■ Dépannage Symptôme Cause probable Action 1.La batterie est-elle entièrement 1.Charger le bloc de batterie. Absence insérée ? d'alimentation dans 2.L'interrupteur d'alimentation est-il 2.Amener l'interrupteur l'imprimante mis sur marche ? d'alimentation sur marche. 1.La source d'alimentation est-elle 1.Appliquer l'alimentation.
  • Seite 32 *1: La batterie est un article fongible et c'est la raison pour laquelle la consommation et la durée de vie sont justes une indication et peut changer selon les conditions d'utilisation et environnementales. *2: JT-H100DP-50; version Europe. Veuillez prendre contact avec un bureau de vente de Panasonic pour la batterie de version Amérique du Nord. 32...
  • Seite 33: Caractéristiques Techniques

    ■ Caractéristiques techniques [Chargeur de batterie:JT-H100CG-55] Rubriques Description Caractéristiques techniques Indication Lampe d'alimentation Mise sous tension: allumée lampe (rouge) Lampe de chargeur 1) Charge, court-circuit sortie, (Vert: 2 (fentes)) Température anormale: 1Hz clignotement 2) Charge terminée: allumée 3) Aucun bon mode : éteint Charge en cours Durée de charge Charge de 2 batteries: Approxi.
  • Seite 34 1999/5/EC. La déclaration de conformité peut être consultée au site http://www.doc.panasonic.de Notification de conformité – Marque CE Ce matériel est dans en conformité avec les conditions de la directive du Conseil européen énumérée ci-dessous :...
  • Seite 35: For Usa

    ■ ■ ■ ■ For USA Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Seite 36: For Canada

    ■ ■ ■ ■ For CANADA Industry Canada Statement This device complies with Industry Canada ICES-003 and RSS210 rules. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
  • Seite 37 [EN] [GE] 37...
  • Seite 38 [FR] [IT] 38...
  • Seite 39 Prouct may be subject to export control regulations. Specifications and manuals are subject to change without notice. Bluetooth is a trademak owned by Bluetooth SIG, INC., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. is a registered trademark of Matsushita Electric Industrial Co.,Ltd. 39...
  • Seite 40 Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berks,RG 12 8FP, UK Phone:+44-1344-476514 Fax:+44-1344-853705 Panasonic Deutschland eine Division der Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg GERMANY Phone:+49-40-8549-2481 Fax:+49-40-8549-3111 Mobility System Business Unit Panasonic System Solutions Company Matsushita Electric Industrial Co., Ltd.

Inhaltsverzeichnis