GB
Troubleshooting
Problem
Possible cause
Solution
No power
Check mains connection
Angle grinder does not start
when On/Off Trigger Switch (8) is
Trigger Lock (9) not operated
See 'Switching On/Off' section and Fig. I
depressed
Machine defective
Contact your dealer or authorised service centre
Grinding/cutting disc is overly worn
Turn off the grinder, remove and replace the disc
Cutting disc is off centre/vibrating
Deformed grinding/cutting disc
Turn off the grinder, remove and replace the disc
eccentrically
Grinding/cutting disc not fitted correctly
Turn off the grinder and refit the disc
12