Key To Symbols - Husqvarna DC 5500 Bedienungsanweisung

Key to symbols

The symbols below are used on the machine and in
this Operator's Manual. It is important that the user
understands the signifi cance of these in order to work
with the machine safely.
Please read the operator's manual
carefully and make sure you under-
stand the instructions before using the
machine.
WARNING! Dust forms when grinding
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor.
• Dust forms when grinding, which
can cause injuries if inhaled. Use
dust mask.
Always wear sturdy non-slip boots with
steel toe-caps.
Always wear approved protective
gloves.
4
- English
Key to symbols
Inspection and/or maintenance should
be carried out with the motor switched
off and the plug disconnected.
Visual check.
Regular cleaning is required.
This product is in accordance with ap-
plicable EC directives.