Husqvarna DC 5500 Bedienungsanweisung Seite 10

Diagram 4.
Control box
The control system consists of two switches:
1. On/Off swich.
Turns machine off in OFF position and on in ON posi-
tion.
2. Fwd/Rev switch.
Changes direction of vacuum pump. Sometimes direc-
tion of vacuum will need to be reversed depending on
phase order of power supply.
10
- English
What is what
1. 2.
IMPORTANT!
Direction should NEVER be changed while
machine is switched to ON position (this is
why there is a lock on the FWD/REV switch).
If direction needs to be changed, turn ma-
chine back to OFF position, wait for 1 minute,
change direction and then switch back on.
Once direction setting has been changed,
remove key from FWD/REV switch before
switching back on.
Changing of direction while machine is run-
ning will result in motor failure.