Inateck P6 Bedienungsanleitung Seite 5

LED Indication
LED Status
Green LED flashes once (LED2)
Blue LED flashes once (LED2)
Blue LED stays on (LED2)
Yellow LED blinks （ light/shade
ratio0.5s : 0.5s） (LED1)
Red LED stays on (LED1)
Frequently Used Barcodes
Enter Setup
Exit without Save
（*） Apply Enter for Suff ix
（*） Enable Auto Laser-darkening Mode
Enable Continuous Scanning Mode
Meaning
Barcode successfully read and
uploaded to computer
Barcode successfully read and saved in
buffer, but not uploaded to computer
Inateck P6 scanner on setup status
Low battery
Inateck P6 scanner in charge (Red LED
off when battery is full)
Exit with Save
Restore Factory Setting
Do Not Apply Enter for Suff ix
Enable Manual Scanning Mode
Enable Auto Induction Mode
4