Inateck P6 Bedienungsanleitung Seite 15

4. The data cannot be sent to my computer. Why?
a. When the distance between Inateck P6 and its adapter
exceeds the effective range, scanned data will not upload to
comupter immediately. Instead, it will be kept in the buffer of
Inateck P6. Quickly double press on the trigger can upload
data from buffer.
b. Under Inventory Mode , scanned data will be kept in the buffer
of Inateck P6. To upload data to computer, please refer to the
use of Data Upload barcode.
5. Some barcodes cannot be read, why?
a. Dirty or unclear barcodes might not be read.
b. Digital barcodes displayed on screen of phones, computers or
tablets cannot be read.
c. It is possible that the setting is off by default for some barcode
types which are not commonly used. You need activate a
specif ic barcode type to get it working. Please feel free to
contact our Customer Service Team for further assistance if
you don't know the exact type of barcode that you are
referring to.
6. Is the device compatible with android devices?
Yes， For Android User: an OTG Adapter is needed for devices
without standard USB.
Note: If you receive an error of unable to transfer data via the
wireless connection (Not applicable for the Inventory Mode),
please re-pair the scanner using the following steps. When
paring, make sure the distance between Inateck P6 and 2.4G USB
adapter is within 2m. Please bear in mind that this process may
take 5 seconds.
Plug the 2.4G
adapter into your PC
Enter Setup
Read Enter Setup
2.4G Paring
Read 2.4G pairing
14