Inateck P6 Bedienungsanleitung Seite 3

Use of Inateck P6
Startup
Note:
1) Inateck P6 will start sleep mode if there is no operation on it over
3 minutes. Short press on the trigger can wake it up.
2) When the distance between Inateck P6 and its adapter exceeds
the effective range, scanned data will be kept in the buffer of
Inateck P6. Quickly double press on the trigger can upload data
from buffer.
Wireless Mode:
1. Insert the 2.4G USB adapter into the USB port of computer. The
initialization is completed if blue LED on the adapter blinks once.
2. Power on Inateck P6 by toggling switch from OFF to ON. Short
press the trigger to emit red laser beam and scan barcodes.
3. Open a f ile on computer and move cursor to the blank where
scanning output should be placed. Scanning results can be
displayed on computer then.
Wired Mode:
2