Maintenance - BaByliss Digital Sensor Bedienungsanleitung

IONIC (5)
The negative ions generated by the hairdryer neutralize static electricity
that sometimes occurs during drying. Negative ions also boost the
effectiveness of no-rinse hair care products for smoother, softer and
shinier hair.
130 mm DIFFUSER (6)
Gently diffuses the airflow to increase volume. Its concave shape respects
the bounce of natural curls and its 15 pins create volume at the roots.
STRAIGHTENING ATTACHMENT 6x90 mm (7)
Distributes the air flow of air over a thick section the width of a brush for a
long-lasting professional straightening look in record time.
STYLING ATTACHMENT 4x75 mm (8)
Combined with the motor's exceptional power, it provides a high speed
and precise air flow for professional styling. The style is flawless and very
long lasting.
PRE-DRYING
Towel dry hair.
DRYING
For drying, use the dryer without an attachment or diffuser. Turn the dryer
on using the ON/OFF switch. Select the gentle mode or intense mode,
depending on your preference. Make circular movements with the dryer
to direct the air to your hair.
STYLING
For styling, use the accessory for the desired hairstyle. The Digital Sensor
has a sensor which recognizes the accessory attachment and automatically
adjusts the power and air flow according to the effect desired:
Note: Take care to properly connect the attachments and the diffuser.
8
- For volume and natural curls
• Attach the diffuser to the dryer.
• Select the gentle mode
• Hold the dryer with the diffuser attached upwards
under the ends of the hair and make circular
movements from the ends to the scalp to create
volume.
• The cold air button sets your style to last longer
- To achieve a professional straightened look
• Connect the straightening attachment 6x90 mm to
the dryer.
• Select the intense mode
• Start by working the hair underneath by fastening
the rest of your hair up with a clip.
• Hold the
6 x 90 mm
attachment head down and using a brush, move
through the hair section from the roots to the ends.
• The cold air button sets your style to last longer
- To create a professional blow-dry style
• Connect the Styling attachment 4x75 mm to the
dryer.
• Select the intense mode
• Hold the
perpendicular to the brush and move through the
hair section from the roots to the ends. Finish by
4 x 75 mm
particularly working the ends for a perfectly styled
blow dry.
• The cold air button sets your style to last longer

MAINTENANCE

Regularly clean the rear grill with a soft, dry brush to maintain the
hairdryer's air flow and prolong the life of the motor. Gently turn and lift
the filter to remove it.
.
.
hairdryer with the straightening
.
hairdryer with the attachment
9
.
.
.