CST/BERGER Lasermark LM2 Bedienungsanleitung Seite 3

LM2 def. 9/7/05
Copyright © 2005 CST/berger,
Stanley Works.
All rights reserved.
The information contained herein is proprietary
information of CST/berger and is subject to
change without notice.
This document shall not be copied or otherwise reproduced
without CST'/berger's written consent.
Thank you for purchasing our LM2 Laser.
Please read this manual thoroughly before operation.
MODELS
LM2 Hi Powered Laser Level & Square,
with Precision Machined Aluminum Base.
SAFETY AND CERTIFICATIONS
Working safely with this instrument is possible only when the
operating and safety information are read completely and the
instructions contained therein are strictly followed.
Do not remove the label on the side of the housing.
The use in combination with other optical instruments, manipu-
lations or use in other applications other than described here,
can lead to dangerous laser outputs.
Do not stare into the laser beam.
Do not direct the laser beam at other persons. Check the beam
path over a relatively long distance and take the necessary pre-
cautions.
This laser complies with all applicable portions of the US Food
and Drug Administration's (FDA) Center for Devices and
Radiological Health standards 21 CFR 1040.10 and 1040.11
3:15 PM Page 3
a division of
LM2 • 3