Aux In - auna Wallie Bedienungsanleitung

EN
44

AUX IN

1 Use a connection lead to connect the portable audio player etc. to the
AUDIO IN socket (27). When using video equipment, connect the audio
output to this unit and the video output to a television.
2 Press the STANDBY button (2) on the main unit oder (1) on the remote
control to turn the power on.
3 Press repeatedly the FUNCTION button (2) on the main unit or the
MODE button (7) on remote control to select AUX IN function.
4 Play the connected equipment. If volume level of the connected device
is too high, sound distortion may occur. Should this happen, lower the
volume of the connected device. If volume level is too low, increase the
volume of the connected device.
Note: To prevent noise interference, place the unit away from the
television.
USING HEADPHONE
(Not included!)
Inserting the plug of your headphone into the systems PHONE JACK (28) will
enable you to listen to the CD, radio or other music sources in private. When
using headphone, the speakers will be automatically disconnected. Use the
VOLUME +/- buttons (17/18) on the main unit or (4/11) on the remote control
to adjust the volume.