miniland baby humitouch Bedienungsanleitung Seite 11

SYMPTOMS
The vapour has
an unpleasant
smell.
The empty
water tank
warning
illuminates with
a red colour,
but the water
tank is full
Only a little
vapour comes
out of the
nozzle
Strange noise
Other
operational
failures
6. MAINTENANCE
In order to always keep the product clean:
∙ Use purified water.
∙ Regularly clean the base of the unit, the water tank, and the transducer according to
the instructions below.
∙ Always change the water in the water tank with clean water every day, in the event
that it has not all been used during normal operation.
∙ Always empty the water tank when it is not being used.
- Cleaning the water tank (every 2 - 3 weeks):
Unscrew the water tank's lid and rinse the water tank with water to remove any lime
deposits.
If you deem it necessary, use vinegar dissolved in water to remove any tough deposits
of lime. Alternatively, there are several cleaning solutions on the market for removing
lime which are suitable for humidifiers. Always follow the manufacturer's instructions
when using this type of product.
- Cleaning the hollow in the base (once a week):
If any lime deposits have formed in the hollow in the base, remove them with a soft cloth
dampened with a neutral cleaning agent and rinse with water.
CAUSE
The humidifier is new
The water is dirty or has
been stored in the water
tank for a long time
The water tank is too full
The water tank has not
been correctly positioned
on the base
There is only a little water
remaining in the water
tank
The transducer is dirty
Vibration of the surface
upon which the humidifier
has been placed
There is only a little water
remaining in the water
tank
Get in touch with the Miniland technical service personnel
ACTION
Open the water tank and air it off in
a cool, dry place for twelve hours
Clean the water tank and fill it with
clean water
Empty the water tank a little and
put it back in position
Remove the water tank and put it
back in position correctly. Check
that some air bubbles appear when
placing the water tank on the base
Fill the water tank with water
Clean the transducer following
the instructions in point 6 of this
instruction manual
Place the humidifier on a flat and
stable surface
Fill the water tank with water
11
ENGLISH