■ Paper Installation
1) Slide Paper Cover Lever
2) Open Paper Cover
3) Install Paper (Paper must be tight and free from dust/sand)
4) Close Paper Cover (Make sure Cover is closed completely)
3)
Paper
■ Charging Battery
1) Put Battery and slide to
2) When charging, Charger LED blinks green. When charging is complete, Charger LED
light stays green. Charging work is limited to one Battery at any one time.
When charging is finished in one Slot, charging in another Slot automatically starts.
* Charging Time: approx. 2H/ Battery
3) Remove Battery from the Charger after Charging.
1)
direction
7
4)
Charger LED (Slot2)
:Green
Power LED :Red
Charger LED (Slot1)
:Green
2)
4)