Carbon Filter - Atag WO61..BM serie Bedienungsanleitung, Installationsanweisung

maintenance
cleaning

carbon filter

extraction
recirculation
GB 10
If you plan to use the appliance as a recirculation hood, you
must first install the carbon filter. In the case of normal use
the carbon filter must be replaced three times annually. In the
case of intensive use the carbon filter should be replaced
more frequently.
installing / replacing
1. Remove the grease filters.
2. Make sure the internal Extraction/Recirculation mode
switch is set to "Recirculation".
3. Position the charcoal filter covering the grille so that the
slots (S) on the filter are aligned with the fixing pins (R).
4. Press down on the filter and turn it in a clockwise
direction until it is fixed in place (bayonet fastening).
5. Replace the grease filters.