Installing/Removing The Processor; Technical Data - Fujitsu D2950 Kurzbeschreibung

Installing/removing the processor

Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• Intel Core 2 Quad, Intel Core 2 Duo, Intel Pentium Dual Core, Intel Celeron Dual Core and
Celeron 4xx with 800, 1066 or 1333 MHz Front Side Bus in the LGA775 design (max. 95W)
• A current list of the processors supported by this mainboard is available on the Internet at:
"ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Compatibility_CPU_x_Board"
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
2 - English A26361-D2950-Z210-1-8N19, edition 1