Fault Codes - Kaiser S 45 70 XL Gebrauchsanweisung

72
Fault Cause
Traces of Tableware
rust on unstable against
tableware rust
Black or Aluminium
gray marks utensils have
on dishes
rubbed against
dishes
Water
This is normal
remaining
in the
bottom of
the tub
Plastic Tomatoes,
items got carrots ketchup,
painted
etc. contain
natural dyers. It
is the reason of
colouring

Fault codes

Codes Meanings
1 Longer inlet time
3 Longer
time, but
reaching required
temperature
4 Overfilled
6,7 Abnormal
temperature
WARNING!
In case of an overflow, cut off the main water
supply before calling the service centre. If there is
some water left in the bottom tub caused by
overfilling or slight leakage, the water should be
removed before restarting the dishwasher.
EN
Remedial action
Wash only the tableware
intended for a dishwasher
Wash in a dishwasher only
the utensils intended for it
A small amount of clean
water around the outlet on
the tub bottom at the back of
the tub keeps the water seal
lubricated
Quantity of a washing-up
liquid or bleaching effect for
this purpose
insignificant
Apply more
liquids (Section see
„Detergent dispenser").
The painted details any more
will not get former colour
Possible Causes
Faucet is not opened
heating Malfunction of temperature
not sensor or of heating element
Contact an expert of the
service centre
Too much inlet water
Contact an expert of the
service centre
Short circuit or break of
temperature sensor.
Contact an expert of the
service centre
are too
washing-up